APC SRVPM10KRI alimentation d'énergie non interruptible Double-conversion (en ligne) 10 kVA 10000 W
search
  • APC SRVPM10KRI alimentation d'énergie non interruptible Double-conversion (en ligne) 10 kVA 10000 W
  • APC SRVPM10KRI alimentation d'énergie non interruptible Double-conversion (en ligne) 10 kVA 10000 W

APC SRVPM10KRI alimentation d'énergie non interruptible Double-conversion (en ligne) 10 kVA 10000 W

3 425,00 €
TTC
APC SRVPM10KRI, Double-conversion (en ligne), 10 kVA, 10000 W, Sinus, 110 V, 300 V
Quantité
Sur devis exclusivement

  Catalogue produits

Mettez dans votre panier vos produits, pour une demande de devis précis et personnalisé.

  Un devis personnalisé

Recevez sous 2 heures un devis personnalisé par nos équipes avec les meilleurs prix du moment.

  Livraison

nous planifions la livraison dans les meilleurs délais sous environ 48H

Automatic internal bypass

Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

EPO

Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

Management Software

Double conversion on-line topology

Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

Management Software

Allows you to easily monitor your utility power and manage your UPS.

Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Intuitive LCD interface

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

High efficiency

High efficiency rates that remain stable even at lower operating power levels

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Intelligent Card Slot

Customize UPS capabilities with management cards.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity

Provides management of the UPS via a serial port.

Predictive failure notification.

Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent Card Slot

Customize UPS capabilities with management cards.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Serial connectivity

Provides management of the UPS via a serial port.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).
APC
4977168

Fiche technique

SmartSlot
Oui
Poids du paquet
20 kg
Hauteur du colis
240 mm
Profondeur du colis
760 mm
Largeur du colis
600 mm
Profondeur
615 mm
Tension des piles
192 V
Largeur
438 mm
Hauteur
86,5 mm
Certification
CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2
Alarmes sonores
Oui
Manuel d'utilisation
Oui
Redémarrage automatique
Oui
Puissance de sortie
10000 W
Bouton de coupure d'urgence d'alimentation (EPO)
Oui
Voyants
Oui
Poids
16 kg
Forme d'onde
Sinus
Tension de voltage à l'entrée (min)
110 V
Tension de voltage à l'entrée (max)
300 V
Le mode ECO
Oui
Test de batterie automatique
Oui
Niveau sonore
58 dB
Modes d'alarme sonore
Alarme en mode batterie, Alarme de surcharge, Alarme de batterie faible
Fréquence d'entrée
40/70 Hz
Port USB
Oui
Interface série
Oui
Taux d'humidité relative (stockage)
0 - 95%
Type d'écran
LCD
Taux d'humidité de fonctionnement
0 - 95%
Types de sortie AC
Hard Wire 3-wire (1P + N + E)
Altitude de non fonctionnement
0 - 15000 m
Altitude de fonctionnement
0 - 3000 m
Estimation de montée subite d'énergie
600 J
Température d'opération
0 - 40 °C
Câbles inclus
Câble USB
Couleur
Noir
capacité de la puissance de sortie
10 kVA
Facteur de crête
3:1
Tension de voltage à la sortie (max)
240 V
tension de voltage à la sortie (min)
220 V
Topologie UPS
Double-conversion (Online)
Double-conversion (en ligne)

Références spécifiques

EAN-13
731304343417

Vous aimerez aussi

Commentaires (0)
Aucun avis n'a été publié pour le moment.